Products
Eco Friendly Unique Mixer Systems
This is our standard MK3 fluidic mixing nozzle –The aggressive ‘Roll Over’ mixing action, mixes from bottom to top of the tank, prevents stratification and the formation of crust.
Our nozzles are available to purchase or hire in 50mm, 80mm and 100mm sizes.
Find Out More
The patented Stemdrive Mk3 fluidic mixer is manufactured from stainless steel, contains no moving parts removing the requirement for annual maintenance.
Our mixers can be used to mix a wide range of materials, primarily, bio-solids, sludge and slurries found within the chemical, food and water effluent treatment industries, although this is not an exhaustive list. Designed to work in arduous conditions, our mixers are safe to use in hazardous areas and conditions not suited to normal mechanical mixing. The Stemdrive mixer is fully submersible, can run continuously even in rigorous applications. With no moving parts in contact with the media being mixed, it is both environmentally friendly and energy efficient.
Stemdrive fluidic mixing range
All our mixers are manufactured at our workshop by highly skilled tradesman. This gives us complete control over the manufacture of the nozzles and our customers benefit from a quality UK manufactured product.
Sparge Lines complete with integral non-return valves, of the same type used in our MK3 fluidic mixers can be manufactured to suit various applications, ideal for use in channels, transfer lines and sumps, where low level agitation is required.
All our products are powered by compressed air, working with Airmac-Gdi Ltd, hydrovane compressors are installed on site to power the mixing nozzles.
Find Out More
Stemdrive alongside Airmac-Gdi Limited use Hydrovane Rotary Vane Compressors for the majority of site installations. The Hydrovane compressor produces high quality, clean, dry and pulse free air on demand. Hydrovane compressors are both quiet and reliable, a direct drive system and slow speed operation (1450-1760 rpm) which typically provide up to 100,000 + operating hours and noise levels as low as 69 dB(A). If serviced in line with the manufacturers recommendations, rotary vane compressors will require minimum maintenance.
Hydrovane compressors are fitted with the Hydrovane Pro Electronic Controller as standard, the system provides reliable operation and continuously monitors the operational parameters of the compressor . The control package supplied with the compressor has an integral emergency stop. The compressor has a phase 3 400v 50Hz motor, which comes complete with thermistors as standard with a 110v winding anti condensation heaters as an additional feature. The starting mode is via a local starter or by means of an MCC, our standard package has a volt free common alarm to initiate an external telemetry alarm.
All our compressors are supplied with weatherproof enclosures for outdoor operation as shown in the photo above.